|
Combining Quality, Performance and Affordability.
|
| EASY INSTALLATION: |
| The 275 mounts easily into your conveyor stringers using only (4) bolts. The 275 uses (2) single point load cells with the HH 436A integrator. the mountings can be modified for installation onto mobile crushers. |
| CONSTRUCTION: |
| The 275 is constructed using a powder coated mild steel modular design. A stainless steel version is available as an option. |
| ACCURACY: |
| The 275 is accurate to +/- 1% of totalised load over a 3:1 design capacity. It can be calibrated by static weights or a material test. |
| LOAD CELL: |
| 10V DC @ 60mA max, up to (2) 350 ohm load cells rated at 250 kg max. load cells are mounted in compressions for optimum accuracy. |
POWER SUPPLY: |
- 85 - 264V AC or 9 - 36VDC
|
| TACHO: |
- 12V DC @ 15mA max short circuit protected
|
| TACHO INPUT: |
- Digital shaft encoder or Digital photo electric sensor
|
| TOTALISER: |
- Resettable and Non-Resettable totaliser
|
| OUTPUTS: |
|
|
| SERIAL OUTPUTS (optional): |
|
|
| PRINT INPUT: |
- Volt free contact to switch 12V @ 3mA
|
| ENVIRONMENT: |
- 0 to 50 deg C, 20 - 80% RH, Non condensing. Storage -40 to +80 deg C
|
| ENCLOSURE: |
- Panel mounting DIN sealed to IP65
- (optional) IP65 wall mounted
|
